Shanghai Ofluorine Chemical Technology Co.,LTD

 
Home About Us Products Test Report Successful Case Contact Us
 
 
   Ofluorine PVDF
T-1 PVDF for coatings
T-2 PVDF for powder coatings
D-1 PVDF Lithium Ion Battery Binders
Ofluorine 904 PVDF for UF membranes
 
J-2 PVDF Extrusion Grade
 
Z-1 PVDF Injection Grade
 
M-1 PVDF Moulding Grade
 
PVDF copolymer
 
PVDF film for solar back sheet
 
   
T-2 PVDF for Powder Coatings
T-2 PVDF
T-2 PVDF belong to thermoplastic fulorocarbon resin, which has high melt flow rate, low melt viscosity.
T-2 PVDF has characteristic of chemical resistance, heat resistance, high mechanical strength, high wear resistance, anti-ultraviolet, anti-irradiation etc.

T-2 PVDF technical data sheet

Property

 Typical Values

Standard

Appearance

Off-white powder

Melt flow rate

18.0-45.0g/10min

ASTM D1238, 230℃,2.16kg

Bulk density

200-400g/L

HG/T 2900

Standard specific gravity

1.77-1.79

ASTM D792

Melting point

164-172℃

ASTM D3418

Hardness

75-76

ASTM D2240

Water absorption

0.1%

Drying method

Safety industrionpowder coating
PVDF begin to decompose above 300 deg.C, and produce HF gas.
Packing
20kg/paper drum


 
Copy©2011 Ofluorine Chemical Technology Co.,LTD. All right reserved
 
Tel:+86-755-61505070  Fax:+86-755-27348636  E-mail: info@ofluorine.com